ISO INTERNATIONAL. STANDARD. ISO. First edition. Rubber hoses and hose assemblies —. Wire-braid-reinforced hydraulic types. ISO Rubber hoses and hose assemblies —. Wire-braid-reinforced and type R2AT, which were specified in ISO and ISO , but. Type EN 1SN / ISO 1 Layer Hydraulic Hose. Technical data: Construction: Covering: Black synthetic rubber. Reinforcement: 1 layer steel wire braid.
|Published (Last):||28 August 2014|
|PDF File Size:||15.23 Mb|
|ePub File Size:||17.47 Mb|
|Price:||Free* [*Free Regsitration Required]|
Effective in vibration, temperature variation, and pressure spike situations.
The paper will discuss testing methods for a new style of fittings. With the plug fittings at their minimum torque values they must complete a 1,cycle pressure fatigue test in accordance to NFPA fatigue standard T2. New and revolutionary designs in fittings, sometimes, do not apply to stated standards and protocol for testing.
Request An Engineering Packet. Request a copy of the Test. Maximum gap minimization is achieved by optimal application of the geometric principle of the taper. Hydraulics and Pneumatics at work in your world. Plug can be resealed repeatedly without loss of effectiveness.
EPCO wanted to determine more accurately the 143-61 pressures of the larger and smaller plug sizes that were not originally included in the earlier Zero-Leak Gold Plug tests conducted by the Fluid Power Institute.
Three samples of plug fittings, sizes ranging from to —12, were torqued to a percentage of prior test results.
302-4 Parker 1/4″ ID Hydraulic Hose
Evaluation by the FPI determined the maximum pressure that each specimen could withstand before it would no longer contain the fluid. This defines a failure. EPCO wanted confirmation of these values under accepted industry practices and established measuring methods. Additional testing will be conducted to determine Proof and failure 14361- of the plugs. The fittings developed a zero leak seal 14361 lower assembly torque values than their SAE counterparts. E Program In Print Links.
Parker ISO /2sn/sae PSI Approx 31feet New* # | eBay
The Zero-Leak Gold Plugs provide a primary metal-to-metal seal with an independent elastomeric back-up seal. Existing standards and specifications will be examined to show how the protocol is not applicable, 1463-1 recommendations made to adequately cover the intent of the official testing protocol. The fittings developed a zero leak seal at very low assembly torque values and EPCO wanted to determine more accurately the torque values at which the fittings would not leak under accepted industry practices and established measuring methods.
Some additional benefits of using this type of plug are: Testing was performed on plug sizes —02 through isoo, testing 3 samples of each respective size.
Zero-Leak Gold plugs are interchangeable with standard port entry plugs.
Once the minimum torque value had been established for each plug size a 2,cycle endurance test was performed on each selected plug size. The purpose of the test is to prove the integrity of the Zero-Leak Gold plugs when independently subjected to both internal and external pressure.
Zero-Leak Gold Plugs have been identified as a replacement and improvement to the standard hollow hexagon plugs manufactured to SAE J presently used within current end fitting terminations.